1. Close and lock all doors using power switch on drivers door panel.

2. Insert and remove key from ignition (Do Not Turn) at least 6 times within 10 seconds.
The hazard lights will flash to indicate original code has been erased.




3. Insert key and turn to ACC position. Press any button on first keyless remote.
Hazard lights will flash to confirm programming.

4. To program additional keyless remotes, unlock and then lock the doors using power
switch on drivers door panel.

5. Press any button on second keyless remote. Hazard lights will flash to confirm
programming.

6. Open drivers door and remove key from ignition. Test remotes.