09-11 Honda Odyssey Fob Entry Programming

Have all remotes for the vehicle on hand. Make sure all the doors and rear
hatch/trunk are closed during programming.

Only need to use 1 remote to get into program mode but all remotes must
be programmed during the same session. Each step must be completed
within 5 seconds.

1. Sit in the car with all doors/trunk tightly closed

2. Turn the key to the ON position, marked by “II” on the ignition bezel
so the dash lights come on, then within 5 seconds press the
“Lock” button on the remote for 1 second or so and release the
button.

3. Turn the key to the OFF position, marked by “I” on the ignition
bezel – dash lights go off.

4. Repeat steps 2 & 3 three more times (A total of 4 times)